KNIPEX - 33 03 160 Tools - Duckbill Pliers, Chrome (3303160)

Product Information

This allows you to see exactly where you’re cutting and helps to prevent any unnecessary or unwanted cuts.

Duckbill Pliers | McMaster-Carr

These wrenches may have their jaws parallel to the handle or at an angle up to 90°; most are set at an angle of 15°. They have narrow, flat tips ideal for holding and bending wires and picking up small parts and components. After a tight nut is broken loose, it can be completely backed off or unscrewed more quickly with an openend than with a box-end wrench. The cordless hand-held power screwdriver has replaced most automatic or spiral screwdrivers for the removal of multiple screws from an airframe.These posts outline the basic knowledge required in using the most common hand tools and measuring instruments used in aircraft repair work. Mechanics in these two industries use the pliers to twist safety wire on fasteners and hardware that need to be secured.

Duckbill Pliers | KNIPEX

Duckbill scissors are incredibly helpful in getting into tight spots where you need to trim something. To avoid damaging the slot or receptacle in the head of the screw, the use of cordless power drills fitted with a removable tip driver to remove or install screws is not recommended, as the drill does not have a slip-clutch installed. Always keep the faces of hammers and mallets smooth and free from dents, chips, or gouges to prevent marring the work.With these tools, you’ll be able to make quick work of any snap rings you need to install or remove. Duckbill pliers resemble a “duck’s bill” in that the jaws are thin, flat, and shaped like a duck’s bill.

Pliers Cutters Shears Grips | Henchman Pliers Cutters Shears Grips | Henchman

Most linemen find these Tsunoda bill pliers to be very useful for removing semiconductive (semi-con) layer on high and medium voltage cables. If you like the video format, at the bottom of this post, look for a YouTube video version where there is a quick tutorial on how to use duckbill scissors. One jaw is fixed, but the other may be moved by a thumbscrew or spiral screwworm adjustment in the handle. A center punch has a heavier body than a prick punch and is ground to a point with an angle of about 60°.In general practice, a pin or bolt which is to be driven out is usually started and driven with a drive punch until the sides of the punch touch the side of the hole. Their crosshatch teeth ensure maximum gripping strength compared with regular needle nose pliers, while their comfortable PVC mat grip helps reduce hand fatigue. I wish I had known then about duckbill scissors because using that often misunderstood tool would have prevented that little mishap and saved me the time of having to go back and fix it, or start over. They’re great for gripping, twisting, and bending small objects like wires and pins and can be used for various tasks, from automotive repairs to jewelry making in any country. For Electronics Manufacturing we offer Electronic needle nose pliers, Electronic diagonal cutter, ESD needle nose pliers, ESD diagonal cutter and VDE 1000V insulated pliers and cutters for electricians.

Duckbill Pliers | Products | KNIPEX Tools Duckbill Pliers | Products | KNIPEX Tools

These pliers are machined with great precision and ground to a smooth finish to remove burrs and rought spot. If a bent pointer, cracked or broken glass (dial type), or signs of rough handling are found, the wrench must be tested. As its name implies, the transfer punch is used to transfer the location of holes through the template or pattern to the material.Pin punches are sized by the diameter of the face, in thirty-seconds of an inch, and range from 1/16 to 3/8 inch in diameter. The ARES 8-Inch Flat Nose Duck Bill Pliers are the perfect tool for any wiring or automotive project. Check out our selection of the best products on the market and find the perfect pair for your needs today!