JENOLITE Rust Remover Thick Liquid | Non-Drip Formula | Fast Acting Rust Treatment | Removes Rust Back To Bare Metal | 150g

Product Information

None of the products will affect stainless steel, but are very effective in removing surface rust and blue scale from welded areas. After removal of the scale, rinse with water and dry the surface. Jenolite is a UK brand that offer a number of rust treatments that have been tried and tested for many years. Their rust converter is their most popular product and is designed to convert rust into a ready to paint surface.

When painted on it seemed to sit on the surface of our rust rather than soaking in and reacting. It also took longer to dry, meaning we had to wait until the next day until we could paint over it with our primer and top coat. Below is a list of the best rust treatments for cars that removes corrosion and helps prevent the spread of new rust. The Best Rust Treatment NON-DRIP GEL FORMULA: Non-drip formulation ensures easy application on vertical services ensuring it works only where needed Any spillage or rust remover on sound painted surfaces not being refurbished should be washed off immediately with water. If white deposits appear on the derusted surface within one hour of drying it is due to humidity. Re-apply the rust remover for five minutes and immediately wipe dry.

But it didn’t last. By the end of our month the coating had almost completely disappeared from our unpainted metal and spots of rust were starting to break through to the other side too. And while it appears to be cheap, the bottle is tiny at just 90ml, making it seem poor value. Verdict

Interestingly, this rust converter is also used on London’s Big Ben and even the Eiffel Tower, which means treating rusty car surfaces will be a walk in the park for this formula. Overall, if you want to convert rust before painting it, the Jenolite Rust Converter is an excellent option that won’t disappoint. It did a good job of protecting our sample too. Just a few dots of the dreaded red were visible on the unpainted side. But it didn’t score higher as it’s expensive if you buy it in this small bottle and doesn’t offer significant advantages. Neutrarust is available in larger bottles though, so it could start to make financial sense if you buy in bulk for bigger jobs. Rustins CONCENTRATED FORMULA REMOVES RUST FAST: Fast acting rust remover, destroys rust, leaving bare metal ready to prime The formula also protects against bacterial growth and provides long term protection, preventing the original problem from happening again. No matter how careful you are with items featuring bare metal, iron oxide can easily lead to significant rust formation and the deterioration of your products. The best rust converters ensure you don’t have to spend hours removing rust or simply replacing crucial items.

Jenolite Anti-Rust Primer Aerosol

Because the remover is more likely to remove all traces of the rust, it, therefore, prevents rust buildup and when used in conjunction with rust prevention solutions such as a rust shield aerosol can last a lot longer without the return of rust. The best rust converter UK consumers can buy can significantly improve the lifespan of various metal products, from cars to gates. These chemical solutions can be applied directly to iron surfaces to convert rust into a protective shield.

The CarPlan Underbody Sealant is another dedicated rust treatment for cars and is a simple brush on formula that’s designed to protect against further corrosion, salt and water. According to the brand, it can be used upon the underbody, door sills, wings, boot lids and a wide array of other components that need protecting. If you intend to sound proof your car, this rust treatment is also well known for its excellent sound deadening qualities. Rust converter is easy to use, it provides a no wipe solution meaning you can apply and go about your day. There’s no continual working the solution into the rust, less elbow grease. As all of the rust converter methods mentioned above convert rust to a stable compound, it ensures whatever surface you use is ready to paint to look new and revamped. It usually takes 3 hours for the solution to fully dry. Ready to be repainted with either water-based or oil-based paint. It’s a good idea to paint over the same day for best results. Pros of rust converter Rust Converter is a chemical formula which acts as a solution to rust buildup, working well on iron and steel components.

Overall, the Hammerite Waxoyl is the best rust treatment for cars that not only removes rust but also prevents it reappearing. Before use, we recommend that you use a wire brush to remove any loose rust and also warm up the formula. It can then be freely sprayed in all the areas that need treating and help to prolong the life of your car.

FAST ACTING: Chemically reacts with rust, making it easy to remove. Ready to prime in under 60 minutes We were really surprised by the results of this rust converters test, not only because the two Jenolite products were so far apart in performance. The fluids here all have a similar appearance, but some are clearly better than others, and cheaper too.Rust converter does not provide a permanent solution, it can help prevent rust through creating a chemical barrier however it does not fully solve the problem of stopping rust forming again. If you need to treat a large amount of rust it might make financial sense to use the BH, and it was still our favourite paint-on fluid, but we’d make sure we applied a decent amount of corrosion protection on top of the treatment too. Hammerite Kurust – Recommended Rust removal also takes more effort. It is a manual process making it more difficult than a rust converter. You know you have a serious product when it has stamps of approval from organisations like NATO and the Ministry of Defence. If it works on tanks and warships then the bottom of your Cortina probably won’t be an issue. More often than not, you can use Rust Remover and Converter interchangeably. We advise against using Rust Remover on delicate metals or sensitive areas, as this could compromise the metal's integrity. For such areas, our Non-Hazardous solution would be ideal.